1988-1998 GMT400 (CK1500) Coolant Overflow Reservoir Bargain Bin #2

This was one of the prototypes of our Gen 2 reservoirs. The firewall mounting tab dimensions were slightly incorrect - although it locks into the firewall properly and bolts into the factory threaded holes, the entire reservoir has a slight backwards tilt (as seen in photos). Due to the dimensional errors of the firewall tab, it also causes the bottom of the reservoir to sit a little further away from the firewall. Without any comparison, the backwards tilt of this reservoir is not overly noticeable. 

In the two side by side comparison photos, this reservoir is on the right, compared to our standard Gen 2 reservoir on the left. 

The firewall tab on this reservoir is not exactly parallel to the back of the reservoir - does not have any effect on installation. The top mounting flange is also not exactly parallel with the top of the reservoir (see front facing photo), but it is hardly noticeable.

Reservoir is fully functional, pressure tested, and equipped with our Kloc Fabrication vented fill cap. It has a 3/8" barb fitting for the coolant connection. Dimensions of the reservoir body are identical to all of our Gen 2 Reservoirs.